Components for Monitoring and Control

• • • • • • • • • •

用于监控的组件

工艺稳定且可重复的计量

计量过程通常由短循环、高重复率和严格设定的公差来定义。而且,喷胶量通常都极小,在这种情况下,最重要的是保证计量是可靠、准确和可再现的。现代生产过程需要对过程能力和应用的可重复性进行详细监控。这些要求必须在开始时仔细定义,并在系统概念设计中加以考虑。DOPAG提供全面的过程监控和控制技术组合,包括齿轮流量计量单元、光栅、压力传感器和计量控制单元。在DOPAG的系统概念设计过程中,我们的工程师与客户密切合作,使过程控制和监控机制与应用要求保持一致,并将它们与适当的泵和计量组件相结合。

产品概览

  1. Light barrier

    Light barrier
    The light barrier is used with shot and high-speed valves to monitor the number of discharged shots.
  2. Metering control unit

    Metering control unit
    The control unit has been designed for the monitoring and control of complex metering processes. It simplifies metering by enabling users to store and recall various programmes.
  3. Pressure sensors

    Pressure sensors
    Pressure sensors for the monitoring of material pressure in complex dispensing processes using shot or spray valves.
  4. Stroke detection

    Stroke detection
    The stroke detection device reliably monitors the correct activity in various dispensing and metering valve types.
  5. 微型流量传感器

    微型流量传感器

    The micro-flow sensor is a flow detection device, used with needle metering valves to confirm that material is being dispensed.

  6. 流量计

    流量计

    Developed specifically for use in DOPAG metering systems, the flow meter is used for measuring the exact material flow rate at any given moment.